Handla som

Phoenix gold ZLOC2.2

615,12 NOK / Stykke

The ZLOC2.2 is the essential solution for enhancing your vehicle’s audio system. While many vehicles now come with integrated amplifiers, the original OEM system often falls short of performance. Replacing the entire audio system can be costly and sometimes not feasible. That’s where our ZLOC converters step in. Not only do they reduce distortion, but they also allow for seamless integration of aftermarket audio components into your OEM system. Gone are the days of being unable to upgrade your head unit – our ZLOC converters cleverly bypass OEM resistance, all while eliminating unwanted system noise. Upgrade your audio experience today with our advanced OEM integration solution. The ZLOC2.2 has two high-level inputs that take the speaker signal from the OEM head unit or amplifier and convert it to a low-level output. This allows you to add an external amplifier to install an aftermarket subwoofer and add more power or more speakers. The ZLOC2.2 has a built-in CLIP indicator that flashes when it senses input or output signal distortion. This lets you easily see when the input signal distorts and enables you to adjust the output signal without clipping for a distortion-free signal.
Les mer


Lignende produkter

DD Audio SC-2
DD Audio SC-2
431,2 NOK / Stykke
DD Audio BSI-1
DD Audio BSI-1
871,2 NOK / Stykke
DD Audio SC6
DD Audio SC6
695,2 NOK / Stykke
AudioControl LC7i
AudioControl LC7i
2 459,6 NOK / Stykke

Specifications  
Speaker Input 2CH        
Outputs 4CH       
REM In Yes         
REM Out Yes         
Load Select 10-Ohm / 60-Ohm / 20K-Ohm   
Ground Isolation GND/ISO/200-Ohm       
Gain Yes,X1  
Clipping Yes,X1  
Center Frequency 20Hz-110Hz      
Bass Level -9 ~ +9dB            
Turn On Mode REM/DC/AUDIO               
Input Mode N/A        
Remote None    
Dimensions(LxWxH)mm 130.6x82x24.8mm          
Chassis Body Aluminum           
Operating Voltage 8 to 32V              
Input Sensitivity 0.5 to 32V         
Operating Voltage 8 to 32V              
Output Voltage Max. 7.5V @ 14.4V   
Max 40V as Input Must be 20K-ohm load   
Signal to Noise >100dB @6.4V output 
Input Impedance 10-Ohm / 60-Ohm / 20K-Ohm   
Frequency Response 10-30kHz           
THD+N <0.01% 
Output Impedance < 120-ohm        
Max Current Draw 120 - 150 mA    
Turn-On Trigger, DC 3 to 7V         
Gain -28 to 0dB          
Terminal Gauge Quick Connect /16# AWG