Lignende produkter
The QP-MR6.5 is a high-output, high-quality midrange woofer designed to get loud and sound clear. Big systems require more from mids and highs than what standard component speaker systems and full-range speakers can deliver. The QP-MR6.5 pro-audio midrange stereo speakers were developed with the precision inherent in a 6.5″ car speaker. The QP-MR6.5 is ready for mobile applications and has a shallow, 2.65” mounting depth so installation will be a breeze.
The QP-MR6.5 Pro Audio Mid Range Speakers open up new possibilities for car audio system design. Modern stereos and interiors make it difficult to add car speakers beyond the original equipment mounting locations molded into door panels, dashes, and pillars. Conventional component systems and coaxial speakers are not efficient enough to match the output of a heavy-hitting sub system.
Midrange speakers typically reproduce mid-bass tones in the 500Hz-4kHz range. This is arguably the most important frequency range, as it encompasses most musical instruments and vocal sounds. Since your ears are most sensitive to this mid-range, the drivers can play at lower power levels while still reproducing good, loud tones. Because of their limited range, stock mid-range speakers often sound dull, flat, and need the support of subwoofers and tweeters for a full-range sound.
The QP-MR6.5 Pro Audio Mid Range Speakers open up new possibilities for car audio system design. Modern stereos and interiors make it difficult to add car speakers beyond the original equipment mounting locations molded into door panels, dashes, and pillars. Conventional component systems and coaxial speakers are not efficient enough to match the output of a heavy-hitting sub system.
Midrange speakers typically reproduce mid-bass tones in the 500Hz-4kHz range. This is arguably the most important frequency range, as it encompasses most musical instruments and vocal sounds. Since your ears are most sensitive to this mid-range, the drivers can play at lower power levels while still reproducing good, loud tones. Because of their limited range, stock mid-range speakers often sound dull, flat, and need the support of subwoofers and tweeters for a full-range sound.
ImpedenceSingle 4 Ω
Sensitivity 1W/1m95
Magnet Weight18 oz
Coil Diameter1.5″
Useable Throw16 mm
Continuous Power100 W
Music Peak Power200 W
Overall Diameter6.61 inches
Mounting Depth2.65 inches
Mounting Diameter5.66 inches
Freq Response130 Hz-9 kHz.
Sensitivity 1W/1m95
Magnet Weight18 oz
Coil Diameter1.5″
Useable Throw16 mm
Continuous Power100 W
Music Peak Power200 W
Overall Diameter6.61 inches
Mounting Depth2.65 inches
Mounting Diameter5.66 inches
Freq Response130 Hz-9 kHz.
Tekniska data
| Storlek på midbas | 6.5" |
| Effekttålighet RMS | 100W |
| Effekttålighet MAX | 200W |
| Frekvensområde | 130hz-9khz |
| Impedans | 4 Ω |
| Känslighet | 1W/1m95db |
| Yttre diameter midbas | 6.61 inches |
| Inbyggnadsdjup | 2.65 inches |
| Monteringshål | 5.66 inches |
hampus spurt
1 år siden
tips till ett steg till tolv såna här middar?
Butikken svarte
Hej!
Tack för din fråga.
Att koppla 12 st högtalare på samma slutsteg kan vara svårt. Det är svårt att få till rätt ohm så det passar till ett slutsteg.
Skulle rekommendera ett slutsteg till 8 högtalare och ett till 4 högtalare. T.ex för placering i två dörrar och en raggarplanka./hatthylla.
T.ex Detta till framdörrarna: https://audio55.se/sv/products/soundqubed-p4-75 och detta till Raggarplanka: https://audio55.se/sv/products/soundqubed-p5001
Hoppas det svarar på din fråga.
MVH
Joakim K
Audio 55